The following instructions and examples are related to capturing packets on AMD.
NOTE: The following commands don't apply to the HS AMD.
1. How to capture a packet trace on the AMD?
- In order to be able to use the tcpdump utility to capture packets, login to the AMD, type the rcon command and press Enter at the Linux prompt.
2. Before starting the capture, make sure that there are no other captures already running by executing the tcpdump status command.
If there's already a capture running (as shown above), you need to stop it before starting a new one. To do that, execute the tcpdump stop command.
Note that the tcpdump stop command is also used to stop and save the trace file after you are satisfied with the amount of data captured.
Number of packets to capture: This can be any number of packets between 1 and 2808348672. Setting this value to "0", will keep on capturing packets until you execute tcpdump stop, 2808348672 packets or 2147473647 bytes are collected.
Path and capture file name: This should be the path-to and name-of your trace file. This field should be enclosed in double-quotes ("").
Filter expression: This is the expression to be used by the tcpdump utility only to capture packets that meet your criteria. This field should be enclosed in double-quotes (""). More information on this filter expression is provided in the "Examples" section below.
Interfaces to capture from (optional): This is an optional field and when it is omitted, the AMD will capture traffic using your filter expression from all the interfaces that are configured as sniffing. This field should be enclosed in double-quotes ("").
Capturing 100 packets from a single host:
tcpdump 100 "/tmp/single_host.cap" "host 188.8.131.52"
Capturing 100 packets from a single host and tcp port 80:
tcpdump 100 "/tmp/single_host_port.cap" "host 184.108.40.206 and port 80"
Capturing packets for multiple hosts without a preset packet limit:
tcpdump 0 "/tmp/mulit_host.cap" "host 220.127.116.11 or host 18.104.22.168 or host 22.214.171.124"
Capturing 100 packets for a single host on a specific interface:
tcpdump 100 "/tmp/host_ifc.cap" "host 126.96.36.199" "eth2"
Capturing 100 packets for a subnet on a specific interface:
Capturing traffic with VLAN tags for a specific host:
tcpdump 0 "/tmp/vlan_host.cap" "vlan and host 188.8.131.52"
Capturing traffic with regular Ethernet frames or VLAN tagged frames for a specific host:
tcpdump 0 "/tmp/vlan_host.cap" "(host 184.108.40.206) or (vlan and host 220.127.116.11)"
Capturing traffic with MPLS tags for a specific host:
tcpdump 0 "/tmp/vlan_host.cap" "mpls and host 18.104.22.168"
Capturing traffic with regular Ethernet frames, VLAN or MPLS tagged frames for a specific host:
tcpdump 0 "/tmp/vlan_host.cap" "(host 22.214.171.124) or (vlan and host 126.96.36.199) or (mpls and host 188.8.131.52)"
2. How to schedule traffic capturing using the tcpdump command?
If you need to schedule traffic capturing using the rcon's tcpdump command, add the following lines to the AMD's /etc/crontab file (in case of compatibility issues, please refer to the given crontab syntax):
0 18 11 * * root /usr/adlex/rtm/bin/rcmd -c' ' 'tcpdump 0 "/var/tmp/nightly.pcap" "host x.x.x.x"'
0 */1 11,12 * * root /usr/adlex/rtm/bin/rcmd -c' ' 'tcpdump status' >> /var/tmp/nightly.log #optional line, generating "log file" hourly
0 6 12 * * root /usr/adlex/rtm/bin/rcmd -c' ' 'tcpdump stop'
The above example will result in capturing the traffic between 6:00 PM every 11th day of each month and 6:00 AM evary 12th day of each month. Meanwhile, the log file will be supplemented every hour.
Note: It's crucial to use the following syntax:
rcmd -c' ' 'tcpdump ......'