topic Re: SNMP GENERIC DEVICE ERROR=39 /sfm event in Extensions

SNMP GENERIC DEVICE ERROR=39 /sfm event

MariettaAlmeida — Mon, 20 Feb 2023 08:15:05 GMT

Hi all,

im trying to connect an Aruba switch with snmp generic device extension but get this error:

Content

Failed to assign monitoring configuration to ActiveGate. Reason: UNKNOWN_ERROR:Status DEVICE_TIMEOUT_ERROR (39) returned from 1 agents (192.xxx: Agent(192.xxx😞 GetBulk timout args: 1.3.6.1.2.1.1.5.0 : request timeout (after 2 retries) [status code=39]);

thanks all

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

DanielS — Wed, 22 Feb 2023 16:40:45 GMT

Hi @MariettaAlmeida can you check connectivity between the AG and the device?

Has the device some filter rules that may be preventing the AG to establish a connection?

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

mariusz_cwiklin — Thu, 09 Mar 2023 16:01:22 GMT

Is your Aruba switch configured with SNMP v2c or 3 version?

We are getting this kind of errors for all devices where manufacturers allow only SNMP v1, which is not supported by Dynatrace SNMP extension.

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

Ilya7 — Fri, 10 Mar 2023 14:21:43 GMT

We have the same problem and we opened a support ticket for this issue. We use SNMP v2c.

I'll give you an update as soon as we have a solution.

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

MariettaAlmeida — Fri, 10 Mar 2023 14:23:24 GMT

Hi @mariusz_cwiklin SNMPv2

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

MariettaAlmeida — Fri, 10 Mar 2023 14:24:33 GMT

@Ilya7 would be kind from you, yes please let me know how it goes !

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

Ana_Kuzmenchuk — Wed, 26 Apr 2023 11:36:43 GMT

Hi @Ilya7 is there any news about your ticket? We'd really appreciate it if you share it with the Community, in case more people are facing the same. Thank you!

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

Ilya7 — Wed, 26 Apr 2023 12:00:09 GMT

Hello @Ana_Kuzmenchuk, @MariettaAlmeida,

solving the ticket took a while because we were troubleshooting a lot.

As it turned out Dynatrace expects the response to be from the exact same IP adress the request was sent to. In our case we have two cisco devices which can be adressed through a single IP adress. The response then comes from one of those devices with a sligtly different IP adress.

So if you have an adress mapping, a loadbalancer or something alike the extension likely won't work.

We didn't realise it was a problem since we can do snmpgets and snmpwalks through the CLI from any machine and we would get an immediate response.

tl;dr: Response must come from the exact same IP the request is sent to.

Best regards,
Ilya

Re: SNMP GENERIC DEVICE ERROR=39 /sfm event

Ana_Kuzmenchuk — Wed, 26 Apr 2023 13:22:40 GMT

Wow, thanks a lot for such a detailed explanation! Accepting it as a solution now 😉