# About User type "Robots" in Application performance analysis

**URL:** <https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451>\
**Category:** Open Q&A\
**Tags:** real-user-monitoring-classic, application-monitoring\
**Created:** [February 5, 2019, 12:46pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451 "2019-02-05T12:46:04Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![hiroshi\_kitahar](https://avatars.discourse-cdn.com/v4/letter/h/b5e925/32.png) [@hiroshi\_kitahar](https://community.dynatrace.com/u/hiroshi_kitahar)\
**Post date:** [February 5, 2019, 12:46pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/1 "2019-02-05T12:46:04Z")

</div>

Hi all,

Could I ask you two questions about “Robots” as below?

\<Q1\>

In Application performance analysis, how does Dynatrace recognize User type “Robots”? Is it IP address?

\<Q2\>

And, on the Application performance analysis, can I check the IP address of Robots?

---

<div class="post-metadata">

**Author:** ![skrystosik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/skrystosik/32/21133_2.png) [@skrystosik](https://community.dynatrace.com/u/skrystosik)\
**Post date:** [February 5, 2019, 12:53pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/2 "2019-02-05T12:53:34Z")

</div>

I think this is done by useragent mostly. I didn’t see any option to determine that traffic from certain IP is robot.

Sebastian

---

<div class="post-metadata">

**Author:** ![Joe\_Hoffman](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/joe_hoffman/32/30752_2.png) [@Joe\_Hoffman](https://community.dynatrace.com/u/Joe_Hoffman)\
**Post date:** [February 5, 2019, 7:22pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/3 "2019-02-05T19:22:08Z")

</div>

As Sebastian stated, robots are detected by their UserAgent string.

Even robots have IP addresses, and this can be found when you drill into the User Session data and look at individual sessions. To filter into just Robots, in the top **Filtered By** field, enter “User Type” with ‘robots’ as the value.

---

<div class="post-metadata">

**Author:** ![Julius\_Loman](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/julius_loman/32/51_2.png) [@Julius\_Loman](https://community.dynatrace.com/u/Julius_Loman)\
**Post date:** [February 6, 2019, 6:20pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/4 "2019-02-06T18:20:09Z")

</div>

Any idea how to add a specific user agent string to the list of robots?

---

<div class="post-metadata">

**Author:** ![skrystosik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/skrystosik/32/21133_2.png) [@skrystosik](https://community.dynatrace.com/u/skrystosik)\
**Post date:** [February 6, 2019, 6:46pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/5 "2019-02-06T18:46:48Z")

</div>

I don’t think it’s possible right now. Maybe RFE?

---

<div class="post-metadata">

**Author:** ![Joe\_Hoffman](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/joe_hoffman/32/30752_2.png) [@Joe\_Hoffman](https://community.dynatrace.com/u/Joe_Hoffman)\
**Post date:** [February 6, 2019, 9:47pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/6 "2019-02-06T21:47:25Z")

</div>

As Sebastian said, it’s not possible thru the user GUI. If you find a robot that is not being recognized properly, open a support ticket and we can initiate a change to the Robot database to have them properly recognized.

---

<div class="post-metadata">

**Author:** ![Julius\_Loman](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/julius_loman/32/51_2.png) [@Julius\_Loman](https://community.dynatrace.com/u/Julius_Loman)\
**Post date:** [February 7, 2019, 6:25am UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/7 "2019-02-07T06:25:44Z")

</div>

Actually, I deal with identification of robots that are performing synthetic tests using various testing tools (Selenium, TestComplete) that in fact are running real browsers. Albeit changing the user-agent string in the browsers is possible, there is no method how to define a custom user agent string as bot. Seems as a valid RFE.

---

<div class="post-metadata">

**Author:** ![jiri\_kurejko](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/jiri_kurejko/32/34229_2.png) [@jiri\_kurejko](https://community.dynatrace.com/u/jiri_kurejko)\
**Post date:** [February 7, 2019, 7:54am UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/8 "2019-02-07T07:54:56Z")

</div>

I asked Support about this some time ago, Dynatrace uses the Udger database of user agents to mark certain agents as robots. Feel free to contact Udger directly at [https://udger.com/](https://udger.com/)

---

<div class="post-metadata">

**Author:** ![philippe\_pathe](https://avatars.discourse-cdn.com/v4/letter/p/67e7ee/32.png) [@philippe\_pathe](https://community.dynatrace.com/u/philippe_pathe)\
**Post date:** [September 7, 2022, 3:37pm UTC](https://community.dynatrace.com/t/about-user-type-robots-in-application-performance-analysis/19451/9 "2022-09-07T15:37:47Z")

</div>

Some editors use Udger to block robots including those for legitimate monitoring… So, sometimes,&nbsp; it’s not an acceptable solution for a monitoring provider… 😞

Why not add a configuration section to configure specific user-agent to indentify a robot for Dynatrace only ?
