# Connecting Dynatrace Managed Cluster (Online) With Mission Control **URL:** \ **Category:** Dynatrace Managed\ **Tags:** dynatrace-managed, managed-cluster, cluster-management-console\ **Created:** [June 20, 2025, 7:55am UTC](https://community.dynatrace.com/t/connecting-dynatrace-managed-cluster-online-with-mission-control/52178 "2025-06-20T07:55:34Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![zaid-bashir](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/zaid-bashir/32/22651_2.png) [@zaid-bashir](https://community.dynatrace.com/u/zaid-bashir)\ **Post date:** [June 20, 2025, 7:55am UTC](https://community.dynatrace.com/t/connecting-dynatrace-managed-cluster-online-with-mission-control/52178/1 "2025-06-20T07:55:34Z")
We are trying to establish communication between our Dynatrace Managed cluster and Mission Control, but we are encountering connectivity issues. The current network flow is structured as follows: **Dynatrace Managed Cluster  → Proxy VM (Reverse Proxy) → Enterprise Proxy → Mission Control** We would appreciate your guidance on the recommended reverse proxy service to configure on the Proxy VM and the proper way to set up this communication path. **Note:**  We attempted to use IIS with Application Request Routing (ARR) on the Proxy VM as a reverse proxy, but it did not work as expected. I addition to that when we are using wget to download the managed installer, its giving us the following issue: -------------------------------------------------------------------------------------- _ **connecting to \… Connected.** _ _ **Failed Reading Proxy Response: Success.** _ -------------------------------------------------------------------------------------- Note that we are able to curl from Reverse Proxy to Dynatrace Mission Control via Enterprise Proxy. ---
**Author:** ![radek\_jasinski](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/radek_jasinski/32/10432_2.png) [@radek\_jasinski](https://community.dynatrace.com/u/radek_jasinski)\ **Post date:** [July 6, 2025, 2:20pm UTC](https://community.dynatrace.com/t/connecting-dynatrace-managed-cluster-online-with-mission-control/52178/2 "2025-07-06T14:20:46Z")
I haven’t come across any dedicated documentation or recommended reverse proxy specifically for communication between Dynatrace Managed and Mission Control. I recommend opening a support ticket with Dynatrace to get official guidance on this scenario.