# Dynatrace Managed server with multiple NICs

**URL:** <https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661>\
**Category:** Dynatrace Managed\
**Tags:** dynatrace-managed\
**Created:** [April 4, 2018, 11:56am UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661 "2018-04-04T11:56:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pshinde](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/pshinde/32/10356_2.png) [@pshinde](https://community.dynatrace.com/u/pshinde)\
**Post date:** [April 4, 2018, 11:56am UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661/1 "2018-04-04T11:56:10Z")

</div>

Hi Team,

We are using 3 Node Cluster with Multiple NICS. We have requirement to pass all the monitoring traffic through MGMT NIC only End to End (OneAgent-Security gateway-Nodes ).Kindly advice How this can be tested in current setup. We’re thinking of stopping fronted Interface in all the 3 nodes and test this scenario. Kindly advise.

---

<div class="post-metadata">

**Author:** ![Radoslaw\_Szulgo](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/radoslaw_szulgo/32/1977_2.png) [@Radoslaw\_Szulgo](https://community.dynatrace.com/u/Radoslaw_Szulgo)\
**Post date:** [April 4, 2018, 3:13pm UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661/2 "2018-04-04T15:13:21Z")

</div>

On the node details settings you have an option to type the ip address you want to use for OneAgent traffic and web ui traffic. It should help you to configure which NIC you want to use.

Also the installer has a possibility to specify the ip address. See help

[https://www.dynatrace.com/support/help/installatio…](https://www.dynatrace.com/support/help/installation/configuration/what-are-the-available-installation-parameters/)

```auto
--cluster-ip — If your machine has more than one network
 interface you need to decide which network interface will be used for
Dynatrace Cluster traffic and put its IP4 address here.

```

Is that what you was looking for?

---

<div class="post-metadata">

**Author:** ![pshinde](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/pshinde/32/10356_2.png) [@pshinde](https://community.dynatrace.com/u/pshinde)\
**Post date:** [April 6, 2018, 3:04am UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661/3 "2018-04-06T03:04:17Z")

</div>

Node details settings on CMC ?

---

<div class="post-metadata">

**Author:** ![Radoslaw\_Szulgo](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/radoslaw_szulgo/32/1977_2.png) [@Radoslaw\_Szulgo](https://community.dynatrace.com/u/Radoslaw_Szulgo)\
**Post date:** [April 6, 2018, 10:38am UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661/4 "2018-04-06T10:38:50Z")

</div>

yes exactly.

---

<div class="post-metadata">

**Author:** ![pshinde](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/pshinde/32/10356_2.png) [@pshinde](https://community.dynatrace.com/u/pshinde)\
**Post date:** [April 6, 2018, 10:10pm UTC](https://community.dynatrace.com/t/dynatrace-managed-server-with-multiple-nics/11661/5 "2018-04-06T22:10:00Z")

</div>

Thanks this helped to solve one problem is Agent is able to communicate with DT cluster on mgmt. ip ,
