# Email notification about low disk space for a specific drive

**URL:** <https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293>\
**Category:** Alerting\
**Tags:** anomaly-detection, problems-classic\
**Created:** [June 25, 2024, 9:37am UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293 "2024-06-25T09:37:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![badgerfifteen](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@badgerfifteen](https://community.dynatrace.com/u/badgerfifteen)\
**Post date:** [June 25, 2024, 9:37am UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/1 "2024-06-25T09:37:30Z")

</div>

Hi,

What I am trying to do is send an email notification when a disk reaches a certain percentage (free). I’m not interested in changing the alerting settings as that goes to our incident response team and they have stipulated 97% is when a major incident occurs. I would like to act much faster than that by sending an email notification at 90%. Just wondering if this can be done through ‘Settings’ or is this more for Workflows.

---

<div class="post-metadata">

**Author:** ![Esam\_Eid](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/esam_eid/32/167_2.png) [@Esam\_Eid](https://community.dynatrace.com/u/Esam_Eid)\
**Post date:** [June 25, 2024, 10:25am UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/2 "2024-06-25T10:25:12Z")

</div>

Hi&nbsp;[@badgerfifteen](https://community.dynatrace.com/user/67521)&nbsp;,

you can create custom metric event and set thresholds 90%

 ![Esam_Eid_0-1719311096160.png](https://global.discourse-cdn.com/dynatrace/original/3X/b/7/b75d3f76e5c3aaaa1b5e67a5873ba82743d26108.png)

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [June 25, 2024, 11:34am UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/3 "2024-06-25T11:34:09Z")

</div>

In Settings-\>Anomaly Detection-\>Disks,

you can do that configuration environment wide:

 ![AntonioSousa_0-1719314969037.png](https://global.discourse-cdn.com/dynatrace/original/3X/9/8/985eda8bd6688568a706b0f66e14f7f336aa5803.png)

You can also define at the host level: Go to Settings for the Host-\>Anomaly Detection-\>Disks  
and there you can even set specific thresholds per detected disk.

Finally, you can try out the new Disk Edge feature:

> **[Host monitoring with Dynatrace](https://docs.dynatrace.com/docs/observe/infrastructure-observability/hosts/monitoring/host-monitoring)**
>
> Monitor hosts with Dynatrace.

---

<div class="post-metadata">

**Author:** ![Malaik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/malaik/32/32673_2.png) [@Malaik](https://community.dynatrace.com/u/Malaik)\
**Post date:** [June 25, 2024, 2:07pm UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/4 "2024-06-25T14:07:50Z")

</div>

[@badgerfifteen](https://community.dynatrace.com/user/67521)

You should first Create Custom Metric on that host/path… (put specific title)

Create Alerting profile and attach the previously created custom metric (put tile as filter)

and the end, create notification by email with this Alerting Profile

---

<div class="post-metadata">

**Author:** ![badgerfifteen](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@badgerfifteen](https://community.dynatrace.com/u/badgerfifteen)\
**Post date:** [July 2, 2024, 2:52pm UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/5 "2024-07-02T14:52:26Z")

</div>

This seems like what I want. Where would I find this specifically again?

---

<div class="post-metadata">

**Author:** ![Esam\_Eid](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/esam_eid/32/167_2.png) [@Esam\_Eid](https://community.dynatrace.com/u/Esam_Eid)\
**Post date:** [July 2, 2024, 3:02pm UTC](https://community.dynatrace.com/t/email-notification-about-low-disk-space-for-a-specific-drive/46293/6 "2024-07-02T15:02:59Z")

</div>

Go to settings → anomaly detection-\> metric events.&nbsp;  
create new one and set the required thresholds.

I hope this helps

Regards,

Esam Eid
