# F5 Extension - Device\_Timeout\_Error

**URL:** <https://community.dynatrace.com/t/f5-extension-device-timeout-error/36240>\
**Category:** Extensions\
**Tags:** snmp, f5, extensions\
**Created:** [August 16, 2022, 3:32pm UTC](https://community.dynatrace.com/t/f5-extension-device-timeout-error/36240 "2022-08-16T15:32:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shakib](https://avatars.discourse-cdn.com/v4/letter/s/4491bb/32.png) [@shakib](https://community.dynatrace.com/u/shakib)\
**Post date:** [August 16, 2022, 3:32pm UTC](https://community.dynatrace.com/t/f5-extension-device-timeout-error/36240/1 "2022-08-16T15:32:39Z")

</div>

The question: When you set-up the F5 2.0 extension, did you have to configure anything with SNMP on your F5 side?

I was wondering if anyone else has come across this before. After setting up the F5 2.0 extension, I am getting the following error:

Failed to assign monitoring configuration to ActiveGate. Reason: UNKNOWN\_ERROR:Status DEVICE\_TIMEOUT\_ERROR (39) returned from 1 agents (F5\_IP\_ADDRESS: GetBulk timout args: 1.3.6.1.2.1.1.5.0 : request timeout (after 0 retries) [status code=39]);

It looks like a connection error. But I’m wondering if because Dynatrace is connecting to our F5 via SNMP, if there is some configuration I need to make on the F5 side.

---

<div class="post-metadata">

**Author:** ![techean](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/techean/32/227_2.png) [@techean](https://community.dynatrace.com/u/techean)\
**Post date:** [August 18, 2022, 6:25am UTC](https://community.dynatrace.com/t/f5-extension-device-timeout-error/36240/2 "2022-08-18T06:25:43Z")

</div>

Just verify the extension connectivity is allowed in network Firewall and verify extension logs.

Hope you are following below link with trouble shooting logs.

[F5 BIG-IP LTM monitoring | Dynatrace Docs](https://www.dynatrace.com/support/help/how-to-use-dynatrace/networks/f5-extension)
