# Generic Cisco Device shows error

**URL:** <https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042>\
**Category:** Extensions\
**Tags:** activegate, snmp, extensions\
**Created:** [October 26, 2022, 8:26pm UTC](https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042 "2022-10-26T20:26:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![santruan](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@santruan](https://community.dynatrace.com/u/santruan)\
**Post date:** [October 26, 2022, 8:26pm UTC](https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042/1 "2022-10-26T20:26:50Z")

</div>

When configuring the Generic Cisco Device extension&nbsp;I have this error message:

_Failed to assign monitoring configuration to ActiveGate. Reason: Extension com.dynatrace.extension.snmp-generic-cisco-device(__1.4.6) not available in cache yet (queued for download)_

When executing the dynatracesourcesnmp utility from the ActiveGate with the snmpwalk and snmpget parameters to the router I get a correct response in both cases (statusCode=0)

If anyone had this error and was able to correct it, I appreciate your help. Thank you

---

<div class="post-metadata">

**Author:** ![MateuszKacprzak](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/mateuszkacprzak/32/5197_2.png) [@MateuszKacprzak](https://community.dynatrace.com/u/MateuszKacprzak)\
**Post date:** [October 27, 2022, 8:18am UTC](https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042/2 "2022-10-27T08:18:34Z")

</div>

Hi&nbsp;[@santruan](https://community.dynatrace.com/user/46387),

This error **doesn’t mean** that something is wrong. It means that the extension has not yet been downloaded.&nbsp;Wait a while and it should be fine.

Best Regards,

Mateusz

---

<div class="post-metadata">

**Author:** ![Ana.Kuzmenchuk](https://avatars.discourse-cdn.com/v4/letter/a/c37758/32.png) [@Ana.Kuzmenchuk](https://community.dynatrace.com/u/Ana.Kuzmenchuk)\
**Post date:** [November 4, 2022, 10:31am UTC](https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042/3 "2022-11-04T10:31:27Z")

</div>

Hey&nbsp;[@santruan](https://community.dynatrace.com/user/46387), any luck with your issue? Was the post by Mateusz helpful? Hope everything works smoothly!

---

<div class="post-metadata">

**Author:** ![santruan](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@santruan](https://community.dynatrace.com/u/santruan)\
**Post date:** [November 7, 2022, 10:31pm UTC](https://community.dynatrace.com/t/generic-cisco-device-shows-error/37042/4 "2022-11-07T22:31:07Z")

</div>

Thanks Mateus, actually the problem was due to the privacy protocol, apparently the wrong one was being configured.&nbsp;Now the extension is working without problems.&nbsp;Thank you very much
