# No data showing for code-level vulnerabilities (.NET 4.5)

**URL:** <https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226>\
**Category:** Open Q&A\
**Tags:** application-security\
**Created:** [June 24, 2025, 1:49pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226 "2025-06-24T13:49:55Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![NicoleMT](https://avatars.discourse-cdn.com/v4/letter/n/3be4f8/32.png) [@NicoleMT](https://community.dynatrace.com/u/NicoleMT)\
**Post date:** [June 24, 2025, 1:49pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/1 "2025-06-24T13:49:55Z")

</div>

Hi everyone,

I’m trying to see code-level vulnerabilities in Dynatrace, but no data is being displayed.  
I’m using **.NET 4.5** and I have already enabled the **Application Security** feature both from the main settings and manually under **OneAgent features**

Does anyone know if there is any additional configuration required or specific prerequisites for it to work with .NET 4.5?

Thanks in advance for your help!

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [June 24, 2025, 2:28pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/2 "2025-06-24T14:28:13Z")

</div>

Hi,

Not sure which technologies are supported, but first, is OneAgent is fullstack mode?

Best regards

---

<div class="post-metadata">

**Author:** ![NicoleMT](https://avatars.discourse-cdn.com/v4/letter/n/3be4f8/32.png) [@NicoleMT](https://community.dynatrace.com/u/NicoleMT)\
**Post date:** [June 24, 2025, 2:33pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/3 "2025-06-24T14:33:58Z")

</div>

Hi,

Yes, is fullstack mode

---

<div class="post-metadata">

**Author:** ![dylan\_taelemans](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/dylan_taelemans/32/21501_2.png) [@dylan\_taelemans](https://community.dynatrace.com/u/dylan_taelemans)\
**Post date:** [June 24, 2025, 6:49pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/4 "2025-06-24T18:49:13Z")

</div>

A couple of things to verify:

1. **Is deep monitoring enabled for the process?**  
Go to:  
**Settings (Process) \> Deep Monitoring**
2. **Are the following OneAgent features “.NET code-level vulnerability evaluation”, “.NET&nbsp;[ASP.NET](http://ASP.NET)” and “NET [ASP.NET](http://ASP.NET) Sensor V2” enabled?**  
 Go to:  
 **Settings (classic) \> Preferences \> Oneagent Features (Note: those features&nbsp;Require restart after enabling​)**  
 
3. **Is Code-level Vulnerability Analytics enabled for .NET?**  
Go to:  
**Settings (classic) \> Application Security \> General settings**  
Ensure it’s enabled and monitoring your .NET environment.

 ![dylan_taelemans_0-1750790720931.png](https://global.discourse-cdn.com/dynatrace/original/3X/0/8/08a3843bbfbe1b3e69dbb2195fea8fdf79bb00b5.png)

---

<div class="post-metadata">

**Author:** ![marco\_irmer](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/marco_irmer/32/3038_2.png) [@marco\_irmer](https://community.dynatrace.com/u/marco_irmer)\
**Post date:** [June 24, 2025, 7:48pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/5 "2025-06-24T19:48:40Z")

</div>

Another thing to keep in mind: Detection of code-level vulnerabilities works differently from third-party vulnerabilities. Third-party vulnerabilities are detected whenever the process loads, whereas code-level vulnerabilities require execution of the vulnerable code. In other words, there has to be load placed on the service so that Dynatrace can observe execution of the vulnerable code.

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [June 25, 2025, 7:57am UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/6 "2025-06-25T07:57:38Z")

</div>

Hi,

I would check which version of .NET is supported in documentation.

Or raising a support ticket.

Best regards

---

<div class="post-metadata">

**Author:** ![c\_schwarzbauer](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/c_schwarzbauer/32/16969_2.png) [@c\_schwarzbauer](https://community.dynatrace.com/u/c_schwarzbauer)\
**Post date:** [June 25, 2025, 10:55am UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/7 "2025-06-25T10:55:50Z")

</div>

and in addition to that: do you know if there are actual code-level vulnerabilities in the .NET application, which Dynatrace should detect?  
if yes, then which ones would that be and in which way is untrusted input propagated there?

---

<div class="post-metadata">

**Author:** ![BalajiMurali](https://avatars.discourse-cdn.com/v4/letter/b/eada6e/32.png) [@BalajiMurali](https://community.dynatrace.com/u/BalajiMurali)\
**Post date:** [July 2, 2025, 3:49pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/8 "2025-07-02T15:49:04Z")

</div>

Does your account have vulnerability detection enabled? Or on the tenant level?

If not, you won’t see anything related to vulnerabilities.

Please check with your Dynatrace Customer Success Manager for more details.

Sometimes, vulnerabilities section is enabled for a specific group of users only, like pentest team. Please check you’re part of the group who has access to vulnerabilities report.

---

<div class="post-metadata">

**Author:** ![Gosia\_Murawska](https://avatars.discourse-cdn.com/v4/letter/g/2bfe46/32.png) [@Gosia\_Murawska](https://community.dynatrace.com/u/Gosia_Murawska)\
**Post date:** [December 30, 2025, 3:18pm UTC](https://community.dynatrace.com/t/no-data-showing-for-code-level-vulnerabilities-net-4-5/52226/9 "2025-12-30T15:18:57Z")

</div>

Hi&nbsp;[@NicoleMT](https://community.dynatrace.com/user/85361)! Did you manage to solve this one?
