# Performance thresholds doubts

**URL:** <https://community.dynatrace.com/t/performance-thresholds-doubts/45037>\
**Category:** Alerting\
**Tags:** problem-detection, problems-classic\
**Created:** [April 7, 2024, 7:43am UTC](https://community.dynatrace.com/t/performance-thresholds-doubts/45037 "2024-04-07T07:43:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Quirina](https://avatars.discourse-cdn.com/v4/letter/q/8797f3/32.png) [@Quirina](https://community.dynatrace.com/u/Quirina)\
**Post date:** [April 7, 2024, 7:43am UTC](https://community.dynatrace.com/t/performance-thresholds-doubts/45037/1 "2024-04-07T07:43:48Z")

</div>

Hi Team,

I’m learning the synthetic monitor performance thresholds part. And I’m facing one problem regarding it. It’s this:

 ![Quirina_0-1712475514853.png](https://global.discourse-cdn.com/dynatrace/original/3X/8/0/809e8cce0534056d8fe06ec1c4840433608eb984.png)

 ![Quirina_1-1712475756883.png](https://global.discourse-cdn.com/dynatrace/original/2X/6/62998b08e61c8abec460e9d7ede99566f6c48280.png)

If I set the threshold as “total duration of all event” when I create one synthetic monitor, when the problem will generate? 3 failures of 5 execution or the issue occurred at once?

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [April 7, 2024, 8:26pm UTC](https://community.dynatrace.com/t/performance-thresholds-doubts/45037/2 "2024-04-07T20:26:49Z")

</div>

[@Quirina](https://community.dynatrace.com/user/58237),

A problem will be generated according to a sliding window of 5 measurements, when 3 of them are breached.  
I’ll give several examples below (hope I get them right 😂). The threshold for these examples is 60 seconds, and assumes no measurements before t0, or all of them below 60 seconds:

- Generated at t2  
t0: 65 seconds  
t1: 66 seconds  
t2: 61 seconds
- Generated at t4  
t0: 55 seconds  
t1: 61 seconds  
t2: 70 seconds  
t3: 55 seconds  
t4: 65 seconds
- Generated at t6  
t0: 62 seconds  
t1: 55 seconds  
t2: 70 seconds  
t3: 55 seconds  
t4: 58 seconds  
t5: 63 seconds  
t6: 65 seconds
- Generated at t9  
t0: 61 seconds  
t1: 61 seconds  
t2: 55 seconds  
t3: 58 seconds  
t4: 59 seconds  
t5: 62 seconds  
t6: 61 seconds  
t7: 55 seconds  
t8: 56 seconds  
t9: 65 seconds

Please note that with the configuration you have, 10 seconds, there will be a problem almost immediately, as Dynatrace says that over the last 24 hours the average was 54.31 seconds. I do understand though that 10 seconds is the default value, and you haven’t changed it yet 😉

---

<div class="post-metadata">

**Author:** ![Quirina](https://avatars.discourse-cdn.com/v4/letter/q/8797f3/32.png) [@Quirina](https://community.dynatrace.com/u/Quirina)\
**Post date:** [April 8, 2024, 1:08am UTC](https://community.dynatrace.com/t/performance-thresholds-doubts/45037/3 "2024-04-08T01:08:46Z")

</div>

Thank you so much for your answer and detailed description. You’re right. The 10s in the 2nd image I pasted is the default value.

Actually, I just confuse the description of the document in red square and orange line part. I just want to know if any one time execution violate the threshold I configured. Does it generate the problem immediately or will generate after 3 violate executions of 5?

 ![Quirina_0-1712538361302.png](https://global.discourse-cdn.com/dynatrace/original/3X/c/0/c07d64ee7d5de701c40df37501bb51022469ea7c.png)
