# Process detection and Data Explorer

**URL:** <https://community.dynatrace.com/t/process-detection-and-data-explorer/52427>\
**Category:** Open Q&A\
**Tags:** dynatrace-managed, processes\
**Created:** [July 9, 2025, 2:47pm UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427 "2025-07-09T14:47:13Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![deni](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/deni/32/163_2.png) [@deni](https://community.dynatrace.com/u/deni)\
**Post date:** [July 9, 2025, 2:47pm UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/1 "2025-07-09T14:47:13Z")

</div>

I have the following case:

I have 2 nodes with one agent on each of them. I have 1 process that runs on node 1, but if node 1 is restarted it will run on node 2. Dynatrace detects this process like 2 processes in 1 process group and if I want to see the process availability % in Data explorer it shows 50% availability.&nbsp; I wait about 3 hours and this didn’t change.

Is there some timeout after which the process will not be monitored anymore? Is there some configuration about this? I saw that the process disappears from Hosts view after about 5 minutes inactivity.

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [July 10, 2025, 9:14am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/2 "2025-07-10T09:14:06Z")

</div>

Hi,

Do you have some screenshot for undestanding better?

Best regards

---

<div class="post-metadata">

**Author:** ![deni](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/deni/32/163_2.png) [@deni](https://community.dynatrace.com/u/deni)\
**Post date:** [July 10, 2025, 10:01am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/3 "2025-07-10T10:01:00Z")

</div>

Hi,

 ![gencheva_0-1752141094717.png](https://global.discourse-cdn.com/dynatrace/original/3X/6/4/6486c867fc448ebae4d3e721000ed9a9cb785562.png)

and this is the same split by process

 ![gencheva_1-1752141192063.png](https://global.discourse-cdn.com/dynatrace/original/3X/c/b/cbfa6779c9a475be9002aba816abefe05b3fe1ba.png)

 ![gencheva_0-1752141334766.png](https://global.discourse-cdn.com/dynatrace/original/3X/c/b/cb8d03fa2e44599ef6e97a9f1e6761d986b23542.png)

In the Technologies and Processes it shows 1 process instance.

I stopped the process on ariel and started it on earth about 3 hours ago. And all views are for the last 10&nbsp; minutes.

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [July 10, 2025, 11:52am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/4 "2025-07-10T11:52:53Z")

</div>

Hi,

Do you need to create some alert or which is target goal?

Best regards

---

<div class="post-metadata">

**Author:** ![deni](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/deni/32/163_2.png) [@deni](https://community.dynatrace.com/u/deni)\
**Post date:** [July 10, 2025, 1:41pm UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/5 "2025-07-10T13:41:42Z")

</div>

Hi,  
No, for now I’m trying to understand how Data Explorer works. I expected that if I want to check the process availability % in last 10 minutes, since there is only one process in this process group in the last 10 minutes to see 100% availability. Instead of that I see 50% availability, because the Data Explorer still “remember” that a long time ago (3-4-5 hours) there was a process with the same name on some other host. So I want to understand where is the mistake in my logic?

Thanks!

Regards, Deni

---

<div class="post-metadata">

**Author:** ![Gosia\_Murawska](https://avatars.discourse-cdn.com/v4/letter/g/2bfe46/32.png) [@Gosia\_Murawska](https://community.dynatrace.com/u/Gosia_Murawska)\
**Post date:** [December 23, 2025, 5:00pm UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/6 "2025-12-23T17:00:59Z")

</div>

Hi&nbsp;[@deni](https://community.dynatrace.com/user/90225)&nbsp;, how are you? 🙂  
Did you maybe solve this issue?

---

<div class="post-metadata">

**Author:** ![deni](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/deni/32/163_2.png) [@deni](https://community.dynatrace.com/u/deni)\
**Post date:** [December 30, 2025, 10:43am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/7 "2025-12-30T10:43:05Z")

</div>

Hi&nbsp;[@GosiaMurawska](https://community.dynatrace.com/user/77704)&nbsp;,

No, it still stays opened …

---

<div class="post-metadata">

**Author:** ![michiel\_otten](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/michiel_otten/32/21987_2.png) [@michiel\_otten](https://community.dynatrace.com/u/michiel_otten)\
**Post date:** [December 30, 2025, 7:27pm UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/8 "2025-12-30T19:27:26Z")

</div>

I see the same behavior on the demo environment.&nbsp; Since the metric used is:builtin:pgi.availability, my best guess is that by default the 72 hours is used that also applies for the smartscape topology. But perhaps we can get someone from dynatrace to confirm this.

---

<div class="post-metadata">

**Author:** ![deni](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/deni/32/163_2.png) [@deni](https://community.dynatrace.com/u/deni)\
**Post date:** [December 31, 2025, 2:50am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/9 "2025-12-31T02:50:08Z")

</div>

I’ll test it, but it would be great if this could also be added to the official documentation.

Thanks 🙂

---

<div class="post-metadata">

**Author:** ![Gosia\_Murawska](https://avatars.discourse-cdn.com/v4/letter/g/2bfe46/32.png) [@Gosia\_Murawska](https://community.dynatrace.com/u/Gosia_Murawska)\
**Post date:** [December 31, 2025, 9:22am UTC](https://community.dynatrace.com/t/process-detection-and-data-explorer/52427/10 "2025-12-31T09:22:36Z")

</div>

I’ll contact the doc team 🙂
