# Setup 3 Environment ActiveGates and 2 Extension ActiveGates separately

**URL:** <https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506>\
**Category:** Extensions\
**Tags:** activegate, extensions\
**Created:** [April 8, 2026, 6:49pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506 "2026-04-08T18:49:44Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![SachinJindal](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@SachinJindal](https://community.dynatrace.com/u/SachinJindal)\
**Post date:** [April 8, 2026, 6:49pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/1 "2026-04-08T18:49:44Z")

</div>

I want to setup 3 Environment AG and 2 Extension AG separately .. i understand installation will have same installer .. but what changes needs to be done for&nbsp;Extension AG so it will only act for&nbsp;Extension capability ..

Regards

Sachin

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [April 8, 2026, 11:00pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/2 "2026-04-08T23:00:04Z")

</div>

[@SachinJindal](https://community.dynatrace.com/user/52338)&nbsp;  
Check out the Configuration properties and parameters of ActiveGate:

> **[Configuration properties and parameters of ActiveGate](https://docs.dynatrace.com/docs/ingest-from/dynatrace-activegate/configuration/configure-activegate)**
>
> Learn which ActiveGate properties you can configure based on your needs and requirements.

In the first 3, dedicate them to OneAgent routing. Guarantee that you have the following, while disabling whatever you don’t need.

- [collector]  
MSGrouter = true

In the other 2, guarantee that the&nbsp;extension\_controller section is enabled, while disabling routing.

Check whether you also need the other modules. restart ActiveGates and check in Deployment Status that they are working as intended…

---

<div class="post-metadata">

**Author:** ![SachinJindal](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@SachinJindal](https://community.dynatrace.com/u/SachinJindal)\
**Post date:** [April 9, 2026, 9:12am UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/3 "2026-04-09T09:12:47Z")

</div>

Hello Antonio,

i have installed default AG and created a separate Network zone and Group for isolation .. My requirement is i wanted this AG only be doing Extension jobs .. but not really sure what needs to be disabled ..

 ![SachinJindal_0-1775725949368.png](https://global.discourse-cdn.com/dynatrace/original/2X/7/7dd0df23a59aff8d9ee9e815b859c4a7b5d6af1a.png)

Thanks

Sachin

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [April 9, 2026, 2:01pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/4 "2026-04-09T14:01:56Z")

</div>

Hi,

You can disable all of them, except “Extensions”&nbsp;[https://docs.dynatrace.com/docs/shortlink/sgw-configure#modules](https://docs.dynatrace.com/docs/shortlink/sgw-configure#modules)

Best regards

---

<div class="post-metadata">

**Author:** ![SachinJindal](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@SachinJindal](https://community.dynatrace.com/u/SachinJindal)\
**Post date:** [April 9, 2026, 3:01pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/5 "2026-04-09T15:01:22Z")

</div>

Thanks Anton .. i did disable most of them and see this Oneagent routing still present which i wanted to disable…

Note :- Reason i wanted to do this i have created 3 AG with default network zone (Environment AG’s) and 2 with XXX network zone (Extension AG’s) .. currently oneagent is sending the traffic to all of the AG’s but i wanted only to sent to default Environment AG only  
:~ $ agctl modules get  
Enabled modules:  
[autoupdate, extension\_controller]

 ![SachinJindal_0-1775745929521.png](https://global.discourse-cdn.com/dynatrace/original/3X/5/2/52ac45d307639ce0198a42146dc8bd78aa286f59.png)

---

<div class="post-metadata">

**Author:** ![AntonPineiro](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antonpineiro/32/49_2.png) [@AntonPineiro](https://community.dynatrace.com/u/AntonPineiro)\
**Post date:** [April 9, 2026, 4:29pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/6 "2026-04-09T16:29:06Z")

</div>

Hi,

You can configure OneAgent to AGs network zone and it would try to use that AG as first option.

Best regards

---

<div class="post-metadata">

**Author:** ![SachinJindal](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@SachinJindal](https://community.dynatrace.com/u/SachinJindal)\
**Post date:** [April 11, 2026, 11:21pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/7 "2026-04-11T23:21:38Z")

</div>

Hello&nbsp;[@AntonPineiro](https://community.dynatrace.com/user/58682)&nbsp; - Have tried this option still same issue..

Thanks

Sachin

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [April 12, 2026, 1:01pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/8 "2026-04-12T13:01:25Z")

</div>

[@SachinJindal](https://community.dynatrace.com/user/52338)&nbsp;  
Do the following and restart AG.

[collector]  
MSGrouter = false

---

<div class="post-metadata">

**Author:** ![SachinJindal](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@SachinJindal](https://community.dynatrace.com/u/SachinJindal)\
**Post date:** [April 14, 2026, 3:34pm UTC](https://community.dynatrace.com/t/setup-3-environment-activegates-and-2-extension-activegates-separately/55506/9 "2026-04-14T15:34:54Z")

</div>

Thanks this is working..
