# Upgrade cluster node from micro to other size

**URL:** <https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661>\
**Category:** Dynatrace Managed\
**Tags:** dynatrace-managed\
**Created:** [January 2, 2022, 8:26am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661 "2022-01-02T08:26:48Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Malaik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/malaik/32/32673_2.png) [@Malaik](https://community.dynatrace.com/u/Malaik)\
**Post date:** [January 2, 2022, 8:26am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/1 "2022-01-02T08:26:48Z")

</div>

Dear All,

For cluster nodes, Is there any procedure to upgrade from Micro size to Small, Medium …

Or we just need to increase the needed component as RAM, CPU…

If you have the right way, thanks to guide me.

Thanks and have a good day.

---

<div class="post-metadata">

**Author:** ![Babar\_Qayyum](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/babar_qayyum/32/13620_2.png) [@Babar\_Qayyum](https://community.dynatrace.com/u/Babar_Qayyum)\
**Post date:** [January 2, 2022, 9:12am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/2 "2022-01-02T09:12:10Z")

</div>

Hello&nbsp;[@Malaik](https://community.dynatrace.com/user/23195)

It seems, resources are not the only thing to change the cluster size but there are other factors/or combinations as well.

 ![Babar_Qayyum_0-1641114577480.png](https://global.discourse-cdn.com/dynatrace/original/3X/b/2/b218eb1840ccb3b1a0e4f55526402cb0b6fc39b0.png)

[Managed hardware requirements](https://docs.dynatrace.com/managed/shortlink/managed-requirements)

Regards,

Babar

---

<div class="post-metadata">

**Author:** ![Malaik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/malaik/32/32673_2.png) [@Malaik](https://community.dynatrace.com/u/Malaik)\
**Post date:** [January 2, 2022, 9:14am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/3 "2022-01-02T09:14:23Z")

</div>

Hi&nbsp;[@Babar\_Qayyum](https://community.dynatrace.com/user/22017)

Yes I saw the table,

But if I change the DiskSpace, RAM, CPUs, IOPS…

The size move by itself to upper size?

---

<div class="post-metadata">

**Author:** ![Julius\_Loman](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/julius_loman/32/51_2.png) [@Julius\_Loman](https://community.dynatrace.com/u/Julius_Loman)\
**Post date:** [January 2, 2022, 9:44am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/4 "2022-01-02T09:44:33Z")

</div>

Hi&nbsp;[@Malaik](https://community.dynatrace.com/user/23195)&nbsp;,

the sizing itself is just a recommendation. The main parameter is RAM. For a typical environment, it is also recommended to increase CPU. Disk parameters are mainly about the ability to store expected amount of data from agents.

Julius

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [January 2, 2022, 11:46am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/5 "2022-01-02T11:46:16Z")

</div>

[@Malaik](https://community.dynatrace.com/user/23195)&nbsp;For the node type to be indicated as another one above in the table, it has to have the CPU & RAM indicated. The Dynatrace Cluster also has to be restarted.

The important thing you should be after is that the Cluster doesn’t enter ALR. As [@Julius\_Loman](https://community.dynatrace.com/user/3364) has mentioned, RAM is normally the main parameter, followed by CPU. But, recently, it has been acknowledged the importance of disk: [https://community.dynatrace.com/t5/Best-practices/Dynatrace-Managed-More-disk-IOPS-needed-for-the-robust/m-p/177117](https://community.dynatrace.com/post/177117)

---

<div class="post-metadata">

**Author:** ![Malaik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/malaik/32/32673_2.png) [@Malaik](https://community.dynatrace.com/u/Malaik)\
**Post date:** [January 2, 2022, 11:52am UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/6 "2022-01-02T11:52:28Z")

</div>

Thanks&nbsp;[@AntonioSousa](https://community.dynatrace.com/user/17213)

Do you know the way to check the actual IOPs for each node?

Thanks and have a good day.

---

<div class="post-metadata">

**Author:** ![AntonioSousa](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/antoniosousa/32/50_2.png) [@AntonioSousa](https://community.dynatrace.com/u/AntonioSousa)\
**Post date:** [January 2, 2022, 12:33pm UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/7 "2022-01-02T12:33:03Z")

</div>

[@Malaik](https://community.dynatrace.com/user/23195)I personally use iostat, but please note it will give you only the IOPs in real-time, not the maximum value. If you want to benchmark, you will have to get a benchmarking tool.

---

<div class="post-metadata">

**Author:** ![Malaik](https://dub1.discourse-cdn.com/dynatrace/user_avatar/community.dynatrace.com/malaik/32/32673_2.png) [@Malaik](https://community.dynatrace.com/u/Malaik)\
**Post date:** [January 2, 2022, 12:36pm UTC](https://community.dynatrace.com/t/upgrade-cluster-node-from-micro-to-other-size/33661/8 "2022-01-02T12:36:22Z")

</div>

Thanks for your feedback  
Yes also use iostat, I just asked you to verify which one you are using.

Have a good day.
