Showing results for 
Show  only  | Search instead for 
Did you mean: 

This product reached the end of support date on March 31, 2021.

AMD - Management server ports


I have an AMD probe behind a couple of firewall, as documentation there are more communication ports other than 443 from management servers (CAS - RUM Console) to the AMD: 9091, 9094 and 9092.
Do I have to demand to security people to open all these port or the 443 is the only one required ?




Dynatrace Pro
Dynatrace Pro

The default ports have changed over time. Which version of DCRUM are you using?

For 12.4.12 - my system shows:

443 - used for the CAS to communicate with the AMD (data acquisition and RUM Console)

22 - for SSH - the source can be from the CAS or a laptop/workstation for administration purposes

UDP 514 for TCAM agents to send data to the AMD.

You may also want to have security open the IP address/Port for out-of-band management (ILo, DRAC, CIMC) depending on your hardware and if it was purchased.

Hello John,

thanks for the prompt reply. I'm using 12.4.13

Based on your suggestion I have forgot to ask the UDP protocol for Citrix.

Thanks again,