cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

This product reached the end of support date on March 31, 2021.

AMD has not fully started yet and cannot process console command while running rcon

vaibhav_goel
Guide
 
6 REPLIES 6

wojciech_kurek
Inactive

This message means, that the AMD did not receive any packet yet. The AMD is considered as fully started when it gets at least one packet for analysis.

Hi.

We are experiencing the samme issue. We've verified that AMD is receiving packets on the capture interfaces, but still this issue, Any pointers?

Regards,

Arild

As the AMD custom driver is filtering out packets not meant for analysis, you must ensure that either the AMD has Autodiscovery enabled or has some user defined software services configured and sees traffic for those software services.

You are right, Wojciech. Turning auto discovery on certainly proved that the only, so far, Software Service defined was configured with the wrong port. Thank you for your support.

Arild.

vaibhav_goel
Guide

Thx Wojciech..

vaibhav_goel
Guide

Hi All,

To add on this its not always necessary that by Auto-Discovery you will get it working , we also needs to ensure the traffic we are receiving is IP TRAFFIC and if not this has to be look by N/W team.

Thanks,

Vaibhav