Complete list of Domain and IP of the access from Dynatrace server to the internet

[robertadellosa1]

Hello,
I would like to install dynatrace, so I can communicate with the dynatrace server and I need the IP addresses to connect it to.
Thank you

[vladislav_samoy]

Hi! Here is a link https://www.dynatrace.com/support/help/deploy-dyn...

Please check the last section

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dynatrace-mission-control

[robertadellosa1]

Thanks, but I need a ip for to link in server dynatrace,one is 54.77.219.214 , and I need other three IP I can not download the dynatrace server

[Radoslaw_Szulgo · Accepted solution]

Is that what you need ?

Your Dynatrace Managed clusters must be able to communicate with Mission Control (URL: https://mcsvc.dynatrace.com¹ and IP addresses: 52.5.224.56, 52.200.165.10, 52.221.165.63, and 13.228.109.33) via HTTPS (port 443)
for license validation, health monitoring, and automatic updates.
Communication between Dynatrace Managed clusters and Mission Control is
based on TLS v1.2.

To enable health monitoring, your Dynatrace Managed Server must also have access to *.live.dynatrace.com (IP addresses 34.203.81.189, 34.205.222.178, 54.164.42.22, 52.1.155.152, and 54.164.49.176) via HTTPS (port 443).

Update December 9th, 2021 :

Always refer to what's documented here:

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dyn...

Dynatrace required connection to only https://mcsvc.dynatrace.com and and IP addresses: 52.5.224.56, 52.200.165.10, 52.221.165.63, and 13.228.109.33. 

Starting version 1.232 for new installations we will require additionally:

`46.137.81.205`, `52.48.91.146` and 

`mcsvc-us.dynatrace.com`, `mcsvc-eu.dynatrace.com`, `mcsvc-ap.dynatrace.com`.

[Joe_Hoffman]

Roberta, Radoslaws response is for those running a Managed onpremise instance of Dynatrace. If you are using a SaaS tenant of Dynatrace, it depends on which data center your tenant is located. So if you have further questions, please be sure to clarify whether you're asking about a Managed instance or a SaaS instance.

[Thusanthan_Kann]

I was looking for Dynatrace Managed and this is helpful! Thank you Radoslaw!

TK

[TakuyaTonaru]

---

@Radoslaw_Szulgo wrote:

To enable health monitoring, your Dynatrace Managed Server must also have access to *.live.dynatrace.com (IP addresses 34.203.81.189, 34.205.222.178, 54.164.42.22, 52.1.155.152, and 54.164.49.176) via HTTPS (port 443).

---

Why not list those domain and IPs in the official documentation?

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dyn...

[robertadellosa1]

Thank joseph , I use a SaaS instance.

[Joe_Hoffman]

For a SaaS instance, the IP address varies depending on your instance location. To find your personal IP addresses, select the Deploy Dynatrace -> Start Installation -> select your platform, and at the bottom of the page will be a list of your IPs.