cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Complete list of Domain and IP of the access from Dynatrace server to the internet

robertadellosa1
Newcomer

Hello,
I would like to install dynatrace, so I can communicate with the dynatrace server and I need the IP addresses to connect it to.
Thank you

8 REPLIES 8

vladislav_samoy
Inactive

Hi! Here is a link https://www.dynatrace.com/support/help/deploy-dyn...

Please check the last section

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dynatrace-mission-control


Thanks, but I need a ip for to link in server dynatrace,one is 54.77.219.214 , and I need other three IP I can not download the dynatrace server

Radoslaw_Szulgo
Inactive

Is that what you need ?

Your Dynatrace Managed clusters must be able to communicate with Mission Control (URL: https://mcsvc.dynatrace.com1 and IP addresses: 52.5.224.56, 52.200.165.10, 52.221.165.63, and 13.228.109.33) via HTTPS (port 443)
for license validation, health monitoring, and automatic updates.
Communication between Dynatrace Managed clusters and Mission Control is
based on TLS v1.2.

To enable health monitoring, your Dynatrace Managed Server must also have access to *.live.dynatrace.com (IP addresses 34.203.81.189, 34.205.222.178, 54.164.42.22, 52.1.155.152, and 54.164.49.176) via HTTPS (port 443).

 

Update December 9th, 2021 :

Always refer to what's documented here:

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dyn...

 

Dynatrace required connection to only https://mcsvc.dynatrace.com and and IP addresses: 52.5.224.56, 52.200.165.10, 52.221.165.63, and 13.228.109.33. 

 

Starting version 1.232 for new installations we will require additionally:

`46.137.81.205`, `52.48.91.146` and 

`mcsvc-us.dynatrace.com`, `mcsvc-eu.dynatrace.com`, `mcsvc-ap.dynatrace.com`.

Senior Product Manager,
Dynatrace Managed expert

Roberta, Radoslaws response is for those running a Managed onpremise instance of Dynatrace. If you are using a SaaS tenant of Dynatrace, it depends on which data center your tenant is located. So if you have further questions, please be sure to clarify whether you're asking about a Managed instance or a SaaS instance.


I was looking for Dynatrace Managed and this is helpful! Thank you Radoslaw!

TK


@Radoslaw_Szulgo wrote:

To enable health monitoring, your Dynatrace Managed Server must also have access to *.live.dynatrace.com (IP addresses 34.203.81.189, 34.205.222.178, 54.164.42.22, 52.1.155.152, and 54.164.49.176) via HTTPS (port 443).


Why not list those domain and IPs in the official documentation?

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dyn...

robertadellosa1
Newcomer

Thank joseph , I use a SaaS instance.


For a SaaS instance, the IP address varies depending on your instance location. To find your personal IP addresses, select the Deploy Dynatrace -> Start Installation -> select your platform, and at the bottom of the page will be a list of your IPs.


Featured Posts