SNMP trap processing

[MichalSzekely]

hello,

I received a trap like this:
{
"event.type": "LOG",
"content": "SNMP trap (SNMPv2-SMI::experimental.94.0.4) reported from src:10.10.10.12\n agent:10.10.10.12",
"status": "NONE",
"timestamp": "1775468179963",
"loglevel": "NONE",
"log.source": "snmptraps",
"dt.openpipeline.source": "extension:com.dynatrace.extension.snmp-traps-generic",
"snmp.trap_oid": "SNMPv2-SMI::experimental.94.0.4",
"device.address": "10.10.10.10",
"dt.entity.snmptraps:com_dynatrace_ext_snmp-traps": "CUSTOM_DEVICE-BLABLA",
"SNMPv2-MIB::snmpTrapOID": ".1.3.6.1.3.94.0.4",
"DISMAN-EVENT-MIB::sysUpTimeInstance": "1033947497",
"SNMPv2-SMI::experimental.94.1.11.1.7.16.0.136.148.113.161.162.91.0.0.0.0.0.0.0.0.0": "2",
"device.name": "huhu.eps.com",
"node.fqdn": "huhu.eps.com",
"snmp.version": "3",
"SNMPv2-SMI::experimental.94.1.11.1.8.16.0.136.148.113.161.162.91.0.0.0.0.0.0.0.0.0": ".0.0",
"SNMPv2-SMI::experimental.94.1.11.1.9.16.0.136.148.113.161.162.91.0.0.0.0.0.0.0.0.0": "MAPS-1010 Port(s) fenced due to RuleName=defALL_OTHER_F_PORTSITW_40, Condition=ALL_OTHER_F_PORTS(ITW/min>40), Obj:port5, F-Port 5 [ ITW,43 ITWs]."
}

I would process this trap and create a problem if the word "fenced" appears anywhere.

My issue is that "fenced" is located in the field
SNMPv2-SMI::experimental.94.1.11.1.9.16.0.136.148.113.161.162.91.0.0.0.0.0.0.0.0.0 
where SNMPv2-SMI::experimental.94.1.11.1 is static and the rest is dynamic, it looks like a device identifier.

How can I filter the value "fenced" in this field for all incoming messages on all devices?

[AntonioSousa]

@MichalSzekely ,
Traditionally you'll have to configure a “Log custom attribute” to search it. In Grail, never did SNMP traps myself, I would have to ask someone that did.

[SjoerdB]

Did you manually change the last part to 0.0.0.0.etc ? Usually there is a still a field-identifyer and after that might be some dynamics. In the snmp-trap extension config you can define that it should trim some last digits from the oid, to only have the devicetype+fieldnumber which you can use to capture the exact field you need. This is always a hard thing to handle, but at least some description on this can be found here:

https://docs.dynatrace.com/docs/shortlink/snmptraps-extension#advanced

In openpipeline-logs (filter: log.source=="snmptraps") you can then create nice attributes, and based on those attributes you can trigger an event in the openpipeline.

[axel_tapia]

In SNMP trap extension, edit monitoring configuration for the related devices, in the list of endpoints expand the corresponding endpoint, scroll to to bottom and click Add  varbinding, set these values:

OID Prefix: SNMPv2-SMI::experimental.94.1.11.1

Number of octets trimmed: 17